How To Open Windows Hard Drive On Mac

1. How To Open Windows Hard Drive On Macbook
2. Read Mac Drive On Windows
3. How To Find Hard Drive On Mac
4. How To Open Windows Hard Drive On Mac Os X

Usually Windows cannot read Mac formatted drive, but if you wish to use third party tools that can fill up the gap and provide access to Mac interface with Apple's HFS+ file system on windows.

Dec 21, 2020 Part 2. Formatting an External Hard Disk Drive From a Mac: To put in simple words, if you want to share the external hard drive between Macintosh and Windows PC, you need to format an external hard drive for the respective system. Hard drives for Windows PC are formatted with NTFS by default, while hard disks for Mac are formatted with HFS+. Open the Windows Disk Management tool by pressing the Windows Key and R to open the Run dialog. Type in diskmgmt.msc and press enter. After this, you should see the partition on the drive that is connected to your computer, both external and internal ones.

One thing you should keep in mind while dealing with this kind of scenario is that when you connect your Mac formatted drive to Windows, you will be informed to erase it with notification 'you need to format the disk in drive X: before you can use it.' Just don't click 'Format' or else all the contents of the drive will be gone once and for all. Rather click 'Cancel' to avoid the situation. The message generally pops up because Windows does not understand or recognize the Apple's HFS+ file system. So don't format until you get the important files out of the drive. But if it does not contain any important files, then you can surely go ahead by clicking the 'Format' button.

Here in this article we would use certain third party tools to read the Mac formatted drive on Windows. Just carry on reading to learn the methods in real.

Method #1: Use HFSExplorer To Read Mac on Windows

It is freeware software available easily on the internet and can be used to read Mac files on Windows interface. Although HFSExplorer is not that fancy in appearance, but it does not install any driver that gets integrated with windows file explorer. So you can only open, read and copy the Mac OS files to Windows directory. In order to know its usage read carefully the steps mentioned below:

Step 1. Download HFSExplorer and install it accurately on your Windows PC.

Step 2. Connect your Mac formatted drive to your Windows PC and launch the HFSExplorer with admin privileges.

Step 3. Now go to 'File' menu and click on 'Load file system from device.'. It will trace your connected drive all of its own accord and you can easily load it.

Step 4. Once the files system is loaded you can see the file contents of the Mac formatted drive on the Graphical window.

Step 5. Select your files, and click 'Extract' and choose a folder to save the extracted materials. They will straight away be copied to the location you have chosen on PC.

Also read: How to wipe a Mac clean before selling

Method #2:Open .Pages on Windows using iCloud Best way to edit videos on mac.

Opening a .page file format on Windows is not as simple as double-clicking the file and accessing it right away. But as long as you have the access to Apple ID, or any web browser like Chrome, Firefox, or Internet Explorer, you can definitely pull off the task. Just go through the method description given below to actuate the task:

Step 1. From your Windows PC, open any of your default browser and visit iCloud.com.

How To Open Windows Hard Drive On Macbook

Step 2. Next you have to sign in with your Apple ID. If you don't have one, you can create one by the Sign-up option posted on the webpage. Now the surprising part is that signing up for an Apple ID immediately grants you 5 GB of free iCloud storage and this is what we are going to put to use in this tutorial.

Step 3. Once you are signed in to your Apple ID, click on the 'Pages' icon and new windows will pop up.

Step 4. Click on 'Settings' icon which is actually a 'gear' icon and click on 'Upload Document' option from the context menu. Again a new window will open up, and you have got to browse the pages that you wish to edit and upload it.

Step 5. Hp smart app for mac download. Now to do the editing part, there are options available:

• Once the pages have been uploaded to iCloud, you can directly open and edit the documents utilizing web-friendly version of the Pages on the browser. It may not have all the tools you require as that of the Page app, yet it is commendable for quick changes.
• Secondly, you can click on 'Tools' icon and choose 'Download a Copy' option form the sub-menu and select 'word' to re-export the documents as Word-friendly files and open it using MS work in your Windows PC. The documents will be downloaded as .doc file and is made available for further download on your PC.

Step 6. Your file would now be downloaded with .doc extension which can be easily accessed with MS Word Processors.

Conclusion:

Whether you use Mac or Windows OS, there shall obviously come a time when you will be bound to do use documents on both the systems, and you would definitely need a way out to open and modify documents between both the OS. Now running documents with .doc or .docx extension of windows is not that difficult to run on Mac, but if you decide to open .page file on Windows, follow the guidelines elaborated above.

Recovering data from a Mac hard drive to a PC is never an easy thing to do due to the incompatibility of the file system between Mac and PC. However, it's not without any solutions. If the file system of your Mac is the HFS+, congratulations, you can save your time by getting back your data directly without formatting. If it's not, you also get other ways to retrieve your data. Carry out the one best suited to your needs.

Part 1: Recover Data from Mac Hard Drive on PC in Two Ways

Depending on the file system of your Mac hard drive, there are two ways to recover data from the disk on the PC. The less complex situation is that you want to recover data from an HFS+ hard drive, in which you can scan and retrieve your lost files with reliable hard drive recovery software, EaseUS Data Recovery Wizard. This powerful tool enables you to recover lost or deleted files from your Mac hard drive without formatting the disk to a Windows compatible format since the tool can recognize the HFS+ file system automatically.

Method 1: Retrieve Files from an HFS+ Hard Drive

Install the software on your PC, connect your Mac hard drive to your computer as an external storage device, then recover your data:

Step 1. Select and scan hard drive.

On EaseUS Data Recovery Wizard, select the drive where you lose your data and click 'Scan'. Wait patiently until this program finishes the scanning, it will find all your lost data on the drive.

Step 2. Find and preview found files on the selected drive.

Check 'Deleted Files', 'Lost Files' or use 'Filter', 'Search' to find the lost files on the selected hard drive. You can double-click to open and check the found files.

Step 3. Recover and save lost hard drive data.

Select all found lost hard drive files, click 'Recover' and browse another secure location to save them. Click 'OK' to confirm and finish the recovery process.

Method 2: Get Back Files from a Non-HFS+ Hard Drive

If the file system of your Mac hard drive is not HFS+ and you still want to recover data from it on a Windows computer, it will take you more time and energy to get things done. Since the data recovery software cannot recognize the Mac hard drive, you will need to format it. In addition, to avoid a second damage to the files on the disk, you first need to back up the existing files on the Mac hard drive with a third-party tool that can help the PC identify the hard drive. The detailed process:

Step 1: Use a tool like HFSExplorer to copy files from your Mac hard drive to your PC.

Step 2: Connect the disk to your PC, use the free partition manager, EaseUS Partition Master, to format the hard drive to NTFS or FAT, which is depending on the size of your hard drive. (The Mac hard drive will be identified as 'Other' in the tool.)

Step 3: Follow Method 1 to recover data from your Mac hard drive on your PC.

Part 2: Recover Data from Mac Hard Drive to PC

If your Mac can still detect and recognize your hard drive, you can recover data from it first, then transfer the files to your PC with the help of an external hard drive.

Read Mac Drive On Windows

Step 1: Download Data Recovery Wizard for Mac on your computer.

How To Find Hard Drive On Mac

Step 2: Recover data from the hard drive to an external storage device.

How To Open Windows Hard Drive On Mac Os X

Step 1: Use a tool like HFSExplorer to copy files from your Mac hard drive to your PC.

Step 2: Connect the disk to your PC, use the free partition manager, EaseUS Partition Master, to format the hard drive to NTFS or FAT, which is depending on the size of your hard drive. (The Mac hard drive will be identified as 'Other' in the tool.)

Step 3: Follow Method 1 to recover data from your Mac hard drive on your PC.

Part 2: Recover Data from Mac Hard Drive to PC

If your Mac can still detect and recognize your hard drive, you can recover data from it first, then transfer the files to your PC with the help of an external hard drive.

Read Mac Drive On Windows

Step 1: Download Data Recovery Wizard for Mac on your computer.

How To Find Hard Drive On Mac

Step 2: Recover data from the hard drive to an external storage device.

How To Open Windows Hard Drive On Mac Os X

Step 3: When the data recovery is done, connect the external storage device to your PC, then copy the recovered files to your Windows computer.